Subject: Help with routing
From: John Duarte (john@keylitho.com)
Date: Wed Apr 04 2001 - 13:56:53 MDT
I am trying to setup a router, using yellow dog, between two networks at
our location.
The two network IPs are:
192.168.1.0
128.129.110.0
I have two NICs in my yellow dog box.
I have turned on IP forwarding.
My routing table goes like this:
Destination Gateway Genmask Flags Metric Iface
192.168.1.3 * 255.255.255.255 UH 0 eth0
128.129.110.253 * 255.255.255.255 UH 0 eth1
192.168.1.0 * 255.255.255.0 U 0 eth0
128.129.110.0 * 255.255.255.0 U 0 eth1
127.0.0.0 * 255.255.255.0 U 0 lo
default 192.168.1.1 0.0.0.0 UG 0 eth0
From the Yellow Dog box I can ping both networks, but I can't ping across
the networks from one workstation to another. I do have a route to the
router on my workstation. Doing a traceroute shows packets going to the
router but not crossing over.
Anyone have any advise?
---------------------------
John Duarte
Key Lithograph
2050 NW Vaughn St.
Portland, OR 97209
Ph: 503-222-9191
Fx: 503-248-9974
e-mail: john@keylitho.com
---------------------------
This archive was generated by hypermail 2a24 : Wed Apr 04 2001 - 16:01:14 MDT