Subject: Re: Install problems on a 9600/350
From: Karl Safranek (karls142@home.com)
Date: Wed Aug 30 2000 - 15:21:13 MDT
I had a similar problem installing on a G4 with two internal ATA drives
(Master, Slave). I was trying to install on the master and was getting the
identical error you mentioned. After disconnecting the slave drive from the
internal bus, the installation worked. This may or may not work in your
case.
karl
> From: "Felix C. Liberato" <fcrespo@multicanaltps.com>
> Organization: Multicanal
> Reply-To: yellowdog-general@lists.yellowdoglinux.com
> Date: Wed, 30 Aug 2000 10:51:35 +0200
> To: yellowdog-general@lists.yellowdoglinux.com
> Subject: Install problems on a 9600/350
>
> -- I'm attempted to install YDL in a 9600/350 PPC and after partitioning the
> external drive correctly , when I push "Done" in fdisk, the machine falls and
> says things like "Segmentation fault...install exited abnormally...sending
> kill signal...you safely reboot your system". I'm lost because using the same
> installer and the same external drive on a beige G3 all works fine. My 9600
> configuration is:
> -PPC 9600/350Mhz
> -320 Mb RAM
> -Dual video display card(One Twin Turbo and one Matrox)
> -External drive Quantum Fireball 4Gb (Entirely dedicated to Linux-I wish-)
>
>
> ----------------------------------------------------------------------------
>
>
> Félix Crespo Liberato
> Multicanal <http://www.multicanaltps.com/>
> C/ Saturno nº 1
> Pozuelo de Alarcón
> 28224 MADRID
> ----------------------------------------------------------------------------
>
This archive was generated by hypermail 2a24 : Wed Aug 30 2000 - 15:27:25 MDT