Subject: RE: Adaptec 29160N and YDL2 2.4 Kernel?
From: Isak Lyberth (ily@serv01.vejlehs.dk)
Date: Sat Aug 04 2001 - 12:26:42 MDT
I saw on kerneltrafic, that Linus is changing the way the SCSI drivers
should be written. I don't recall what it was excactly, but you should try
to get the newest patch (Yes i know, standard answer).
Regards
Isak
-----Original Message-----
From: frazz@lump.mine.nu
To: Yellow Dog Linux General List
Sent: 8/4/01 4:42 PM
Subject: Adaptec 29160N and YDL2 2.4 Kernel?
Hey all I am having an issue since I upgraded my SCSI card to a Adapterc
29160N, it works beautifully under MacOS, but having one small issue
under
Linux I'm getting this every second on stderr (printed to VT1).
Aug 4 09:38:38 lump kernel: (scsi3:A:6:0): data overrun detected in
Data-in phase. Tag == 0x1e.
Aug 4 09:38:38 lump kernel: (scsi3:A:6:0): Have seen Data Phase.
Length
= 16.
NumSGs = 1.
Aug 4 09:38:38 lump kernel: sg[0] - Addr 0x5764e0 : Length 32
Aug 4 09:38:38 lump kernel: (scsi3:A:6:0): data overrun detected in
Data-in phase. Tag == 0x32.
Aug 4 09:38:38 lump kernel: (scsi3:A:6:0): Have seen Data Phase.
Length
= 16.
NumSGs = 1.
Aug 4 09:38:38 lump kernel: sg[0] - Addr 0x5764e0 : Length 32
Aug 4 09:38:38 lump kernel: (scsi3:A:6:0): data overrun detected in
Data-in phase. Tag == 0x65.
Aug 4 09:38:38 lump kernel: (scsi3:A:6:0): Have seen Data Phase.
Length
= 16.
NumSGs = 1.
Aug 4 09:38:38 lump kernel: sg[0] - Addr 0x5764e0 : Length 32
My guess is that it would have to be the adaptec driver in the kernel?
Any helpful hints from anyone?
-Frazz
This archive was generated by hypermail 2a24 : Sat Aug 04 2001 - 11:35:18 MDT