Subject: Re: openssh-3.0p1 interactive auth problems on a power mac 8500
From: Keary Suska (hierophant@pcisys.net)
Date: Wed Dec 05 2001 - 11:39:20 MST
If I were to hazard a guess I would say that there may be a permissions
problem with the local user files (~/.ssh/*). I don't recall what these
permissions should be, but have you verified that they are
readable/writable/executable by the current user (sharon?)?
Keary Suska
Esoteritech, Inc.
"Leveraging Open Source for a better Internet"
> From: Sharon Budde <sharon@forward.net>
> Reply-To: yellowdog-general@lists.yellowdoglinux.com
> Date: Tue, 4 Dec 2001 18:28:07 -0600
> To: yellowdog-general@lists.yellowdoglinux.com
> Subject: openssh-3.0p1 interactive auth problems on a power mac 8500
>
>
> I'm running Champion 1.1 on a on a Power Macintosh 8500/132. I recently
> upgraded from ssh-1.2.27 to openssh-3.0p1 using openssl-0.9.6b &
> openssl-engine-0.9.6b. Everything installed with no complaints however I am
> unable to authenticate interactively.
>
> I read about the MD5 big endian problem that PowerPCs have (referred to at
> http://www.yellowdoglinux.com/resources/errata_cs11.shtml#pam) and installed
>
> pam-0.68-10.ppc.rpm and passwd-0.60-1.ppc.rpm, again without problems.
>
> When I attempt to login I get the following:
>
> [/home/sharon]$ ssh -v sharon@localhost
> OpenSSH_3.0p1, SSH protocols 1.5/2.0, OpenSSL 0x0090602f
> debug1: Reading configuration data /usr/local/etc/ssh_config
> debug1: Seeding random number generator
> debug1: Rhosts Authentication disabled, originating port will not be
> trusted.
> debug1: restore_uid
> debug1: ssh_connect: getuid 511 geteuid 0 anon 1
> debug1: Connecting to boxen.forward.net [209.100.233.101] port 22.
> debug1: temporarily_use_uid: 511/511 (e=0)
> debug1: restore_uid
> debug1: temporarily_use_uid: 511/511 (e=0)
> debug1: restore_uid
> debug1: Connection established.
> debug1: read PEM private key done: type DSA
> debug1: read PEM private key done: type RSA
> debug1: identity file /home/sharon/.ssh/identity type -1
> debug1: identity file /home/sharon/.ssh/id_rsa type -1
> debug1: identity file /home/sharon/.ssh/id_dsa type -1
> debug1: Remote protocol version 1.99, remote software version OpenSSH_3.0p1
> debug1: match: OpenSSH_3.0p1 pat ^OpenSSH
> Enabling compatibility mode for protocol 2.0
> debug1: Local version string SSH-2.0-OpenSSH_3.0p1
> debug1: SSH2_MSG_KEXINIT sent
> debug1: SSH2_MSG_KEXINIT received
> debug1: kex: server->client aes128-cbc hmac-md5 none
> debug1: kex: client->server aes128-cbc hmac-md5 none
> debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
> debug1: dh_gen_key: priv key bits set: 128/256
> debug1: bits set: 1581/3191
> debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
> The authenticity of host 'boxen.forward.net (209.100.233.101)' can't be
> established.
> RSA key fingerprint is 5a:89:c8:56:8f:b1:e3:19:d6:fb:bb:7a:94:9c:d3:17.
> Are you sure you want to continue connecting (yes/no)? yes
> Warning: Permanently added 'boxen.forward.net,209.100.233.101' (RSA) to the
> list of known hosts.
> debug1: bits set: 1570/3191
> debug1: ssh_rsa_verify: signature correct
> debug1: kex_derive_keys
> debug1: newkeys: mode 1
> debug1: SSH2_MSG_NEWKEYS sent
> debug1: waiting for SSH2_MSG_NEWKEYS
> debug1: newkeys: mode 0
> debug1: SSH2_MSG_NEWKEYS received
> debug1: done: ssh_kex2.
> debug1: send SSH2_MSG_SERVICE_REQUEST
> debug1: service_accept: ssh-userauth
> debug1: got SSH2_MSG_SERVICE_ACCEPT
> debug1: authentications that can continue:
> publickey,password,keyboard-interactive
> debug1: next auth method to try is publickey
> debug1: try privkey: /home/sharon/.ssh/identity
> debug1: try privkey: /home/sharon/.ssh/id_rsa
> debug1: try privkey: /home/sharon/.ssh/id_dsa
> debug1: next auth method to try is keyboard-interactive
> debug1: authentications that can continue:
> publickey,password,keyboard-interactive
> debug1: next auth method to try is password
> sharon@mrtg.forward.net's password:
> debug1: authentications that can continue:
> publickey,password,keyboard-interactive
> Permission denied, please try again.
> sharon@mrtg.forward.net's password:
> debug1: authentications that can continue:
> publickey,password,keyboard-interactive
> Permission denied, please try again.
> sharon@mrtg.forward.net's password:
> debug1: authentications that can continue:
> publickey,password,keyboard-interactive
> debug1: no more auth methods to try
> Permission denied (publickey,password,keyboard-interactive).
> debug1: Calling cleanup 0x181f9f0(0x0)
>
> [root@mrtg sbin]# sshd -d
> debug1: Seeding random number generator
> debug1: sshd version OpenSSH_3.0.2p1
> debug1: private host key: #0 type 0 RSA1
> debug1: read PEM private key done: type RSA
> debug1: private host key: #1 type 1 RSA
> debug1: read PEM private key done: type DSA
> debug1: private host key: #2 type 2 DSA
> socket: Invalid argument
> debug1: Bind to port 22 on 0.0.0.0.
> Cannot bind any address.
>
> from /var/log/messages
> Dec 4 18:20:01 mrtg sshd[24497]: Failed password for sharon from
> 216.229.143.89 port 2572 ssh2
> Dec 4 18:20:07 mrtg last message repeated 2 times
> Dec 4 18:20:07 mrtg sshd[24497]: Connection closed by 216.229.143.89
>
> Thanks in advance to anybody that might be able to help me. Much
> appreciated.
>
> Sharon
>
> sharon@forward.net
> Forward.Net: http://www.forward.net
> TechRequests: request@forward.net
> Online FAQs: http://support.forward.net
> Tech Support: 312.577.2250 option 3
> Fax: 312.577.2256
>
>
This archive was generated by hypermail 2a24 : Wed Dec 05 2001 - 11:53:06 MST