Subject: Re: Server is running atalk but doesn't appear in chooser
From: ke Svensson (aakesve@algonet.se)
Date: Wed Feb 06 2002 - 12:48:45 MST
Hi Gary!
I guess you've already checked this, but it might be that atalk tries to
bind to eth0 wich is default, but your new extra card is probably eth1.
Check it out in /etc/atalk/atalkd.conf at the bottom. For your new NIC it
would be enough with: 'eth1 -phase 2'.
Please let me know how it works out since my afpd server doesn't show in the
chooser either!
Regards,
Ake Svensson, Sweden
> Från: Gary Ash <garyash@dharbor.com>
> Svara till: yellowdog-general@lists.yellowdoglinux.com
> Datum: Wed, 6 Feb 2002 13:39:01 -0700
> Till: yellowdog-general@lists.yellowdoglinux.com
> Ämne: Re: Server is running atalk but doesn't appear in chooser
>
> I don't think I have multiple zones. It's just a network with 3 Macs running
> MacOS 9.x, a PC running Redhat 7.1 (appletalk works fine on this machine), and
> this machine, a PowerMac 9500 running YDL 2.1. (This machine also has a
> static IP; it has a ethernet card installed, which I'm using instead of the
> built-in ethernet)
>
> It's all behind a linksys cable/dsl router which is acting as a DHCP server
> for the MacOS-based machines.
>
> -Gary
>
> -------------------------------
> At 3:19 PM -0500 2/6/02, nathan r. hruby wrote:
>>
>>
>> Assuming you have multiple zones? I'm having a similar problem on x86
>> with 5.1.1, won't startup / register in anthing but the defult zone.
>>
>> If you try to start the server with no ATALK_ZONE defined in
>> /etc/atlak/netatalk.conf what happens (if you have a router it should give
>> you a zone a nd network number in the defualt zone)?
>>
>> If you have multiple adaptoers on your machine, edit atalkd.conf and set
>> the -dontroute flag on each adaptor you have, else atalkd will try to
>> route ddp across all the adpators it finds.
>>
>> -n
>> --
>> ......
>> nathan hruby - nhruby@arches.uga.edu
>> computer support specialist
>> department of drama and theatre
>> http://www.drama.uga.edu/
>> ......
>
>
This archive was generated by hypermail 2a24 : Wed Feb 06 2002 - 14:06:33 MST