Subject: Re: Farallon Com Slot II Ethernet Card
From: Sean O. Denney (sdenney@cise.ufl.edu)
Date: Fri Feb 15 2002 - 16:54:39 MST
I recently installed the exact same card in my 6400/200. i searched
the list archives and here is what i came up with:
http://lists.yellowdoglinux.com/yellowdog-general/november99/0234.html
I followed the directions to the letter and it worked. I am running
YDL 1.2.1, but this should work just as well for YDL 2./2.1.
The one thing he forgot to mention though was to compile the tulip
module separately as well as in the kernel.
lso, when in menuconfig, go to
--> Network Device support
--> Ethernet (10 or 100Mbit)
place an M next to
DECchip Tulip (dc21x4x) PCI support
--- Sean
On Fri, 15 Feb 2002, Drew Lane wrote:
> Can anyone tell me the exact driver to use for the Farallon
> Ethertx 10/100 Com Slot II Ethernet card on a Performa 6360?
>
> Looking through the list archives, several people have mentioned
>
> CONFIG_DEC_ELCP
>
> But I don't even see this as an option in YDL 2.1 make menuconfig
>
> I have tried the CONFIG_TULIP driver, but I'm not having any luck
> getting an Internet connection. I believe I have netcfg set correctly.
>
> How can I confirm that the driver is working properly?
>
> I have a DSL connection to which the ethernet card is connected
> via a router on gateway 10.0.0.1
>
> Everything works great on Mac OS with the Farallon driver.
>
> Booting up it takes about 30 seconds at this point:
> Bringing up interface eth0: [ OK ]
>
> ifconifg:
>
> eth0 Link encap: Ethernet HWaddr: 00:00:C5:58:02:C2
> inet addr: 10.0.0.4 Bcast: 10.0.0.255 Mask 255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> etc.
>
> route -n
>
> 10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
> 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
> 0.0.0.0 10.0.0.1 0.0.0.0 UG 0 0 0 eth0
>
>
> Thanks!
>
> Drew
>
>
>
>
This archive was generated by hypermail 2a24 : Fri Feb 15 2002 - 17:09:51 MST