Re: YDL install w/ multiple drives


Subject: Re: YDL install w/ multiple drives
From: Gordon Neault (gordo-x@shaw.ca)
Date: Tue Jan 01 2002 - 11:00:16 MST


When you startup via GUI Open Firmware, can you select the MacOS
partition that way? (hold "option" key on startup).
If so, then it's a bootloader configuration thing. If not, something's
wrong with MacOS (partition map?).
On Tuesday, January 1, 2002, at 11:35 AM, C.L. Simco wrote:

> Hi, and thanks for the help in advance....
>
> I installed YDL 2.1 successfully, by itself, on one of
> the drives in my system. (see Sys Configuration below).
> I did not however, place a Mac system on this disk, as I
> have a Mac system on ANOTHER disk. I am under the
> impression from reading the "Getting Started w/ YDL"
> book, that this is possible though the book did not go into
> detail to accomplish this. I am new to Linux/ Unix and am
> proceeding cautiously until I have a better understanding of the
> console and commands (VERY new to me).
>
> CURRENT SITUATION:
>
> I can start up in YDL, move around and configure in KDE.
> I can shut down in YDL.
> I do not, on startup, have the option of starting in the Mac environment
>
> from the startup prompt (no "M" is displayed). I cannot find MOL
> though I installed an "Everything" package.
>
> In order to switch to Mac, I have to Exit YDL, shut down, disconnect
> the YDL drive, then restart (oddly since the YDL installation it now
> takes
> longer by nearly 2 min to start MAC. Seems to hang at the screen w/
> the first appearance of the cursor).
>
> I would like to be able to configure YDL to have the Mac, YDL, MOL
> startup options, recognizing Mac on the other disk, if this is possible.
>
>
>
> ---SYSTEM CONFIGURATION---
>
> ==B+W G3-300
> ==System: Mac OS 8.6
> ==704 MB Ram
> ==Virtual memory: off
>
> ==+CD Drive ATA 0 ID =0
> ==+ Iomega Zip ATA0 ID=1
>
> ===+= 6 Gig Quantum HD - Internal ATA1 ID=0 (to motherboard)
> Partitions: 1 - Format HFS
> Name: YDL
> Jumpered: Default (Master) Current YDL Installation
>
> =+ Sonnet PCI card
>
> ===+= 40 Gig Quantum HD - SCSI Bus1 ID=0
> Partitions: 2 - Format HFS+
> Jumpered: Cable Select
> ======+=Partition 1
> Name: Darwin-finity- Currently used for Primary Mac
> OS 8.6
> ======+=Partition 2
> Name: Darwin-bkup- Intended for FUTURE MAC OS 9 - OS
> X install/
> Backup of current system / storage
>
> ===+= 20 Gig Quantum HD - SCSI Bus1 ID=1
> Partitions: 1 - Format HFS+
> Name: andbeond
> Jumpered: Default (Master) Currently used for Applications
>
> ===+= 30 Gig Quantum HD - SCSI Bus1 ID=2
> Partitions: 1 - Format HFS+
> Name: quantum
> Jumpered: Default (Master) Currently used for Scratch
> Disk/ Storage
>
>
> Thanks again and a better NEW YEAR to all,
>
> CL
>
>
>
> THE WISDOM OF WILL ROGERS
> "There are three kinds of men. The one that
> learns by reading. The few who learn by
> observation. The rest of them have to pee
> on the electric fence for themselves."
>
>



This archive was generated by hypermail 2a24 : Tue Jan 01 2002 - 11:40:39 MST