Re: YDL install w/ multiple drives


Subject: Re: YDL install w/ multiple drives
From: C.L. Simco (clsimco@random-specific.com)
Date: Tue Jan 01 2002 - 19:13:22 MST


Avinash,

Thank you for your patience with my learning curve ;-))

OK, logged in as [root] I input the command ...'cat /proc/scsi/scsi'
and the result is: attached devices: none
As far as the Sonnet card, yes this is the card that the 3 Mac HFS+
drives are attached to.
CL

Avinash Gupta wrote:

> Open a console window in KDE and type 'cat /proc/scsi/scsi' ... what is the
> output you see on the screen? I am trying to find out if your SCSI drives are
> visible under linux ... if yes, then you should see some output with the
> above command. BTW, is the Sonnet PCI card your SCSI card?
>
> -- Avinash Gupta (agupta@mediaone.net)
>
> On Tuesday 01 January 2002 07:56, you wrote:
> > Avinash,
> >
> > I do not know what you mean. Remember I'm
> > just starting, VERY green. Please explain.
> >
> > Thank you
> > CL
> >
> > Avinash Gupta wrote:
> > > What is the output you get when you do a?:
> > > cat /proc/scsi/scsi
> > >
> > > -- Avinash Gupta (agupta@mediaone.net)
> > >
> > > On Tuesday 01 January 2002 06:58, you wrote:
> > > > Hi and thanks for responding to both Gordon and Avinash,
> > > >
> > > > I've spent the last couple of hours since Avinash
> > > > responded to my first message trying to do what he suggested.
> > > >
> > > > Here is what happened:
> > > >
> > > > When I figured out how to get into and use the Konsole in KDE
> > > > (took awhile to figure out how to log in as root)
> > > > I tried to append the " /etc/yaboot.conf " to include the "macos="
> > > > line that Avinash suggested. Then it took a while to figure out how to
> > > > re-run the "ybin" from the command prompt. (I'm really green, here)
> > > >
> > > > Each time I ran the"ybin" I got an error, that told me in effect:
> > > > "Put in the correct path to ther device or I can do nothing to help
> > > > you".
> > > >
> > > > Here is the info that I used to append the /etc/yboot.conf file
> > > > with:
> > > >
> > > > macos=/dev/sda1
> > > > macos=/dev/sda1a
> > > >
> > > > As you see I'm guessing since, although I know where the device is in
> > > > MAC OS terms (see system info below) but not in Linux/Unix terminology.
> > > > I know that there two positions on the SCSI card, and 3 drives. The
> > > > drive/ partition that I want to use as the Mac OS is named
> > > > "darwin-finity". note: I do have a duplicate of that system on the the
> > > > partition "darwin-bkup"
> > > >
> > > > that I hope is not causing confusion. (I COULD dump it).
> > > >
> > > > So... with the error that I received, I finally deleted the "macos="
> > > > line from
> > > > yaboot.conf and re-ran 'ybin' and received no error before shutting
> > > > down YDL to come back to MAC. in other words restored the original file
> > > > to original state.
> > > >
> > > > I need to figure out the "address" of the drive and partition that
> > > > MacOS resides, to feed into the file in the correct format, before I
> > > > try your suggestion
> > > > Gordon, I think. If either you or Avinash can give me a better idea of
> > > > what to call the path, from the info supplied below that would be a
> > > > GREAT help. thanks again
> > > >
> > > > CL
> > > >
> > > > Gordon Neault wrote:
> > > > > When you startup via GUI Open Firmware, can you select the MacOS
> > > > > partition that way? (hold "option" key on startup).
> > > > > If so, then it's a bootloader configuration thing. If not,
> > > > > something's wrong with MacOS (partition map?).
> > > > >
> > > > > On Tuesday, January 1, 2002, at 11:35 AM, C.L. Simco wrote:
> > > > > > Hi, and thanks for the help in advance....
> > > > > >
> > > > > > I installed YDL 2.1 successfully, by itself, on one of
> > > > > > the drives in my system. (see Sys Configuration below).
> > > > > > I did not however, place a Mac system on this disk, as I
> > > > > > have a Mac system on ANOTHER disk. I am under the
> > > > > > impression from reading the "Getting Started w/ YDL"
> > > > > > book, that this is possible though the book did not go into
> > > > > > detail to accomplish this. I am new to Linux/ Unix and am
> > > > > > proceeding cautiously until I have a better understanding of the
> > > > > > console and commands (VERY new to me).
> > > > > >
> > > > > > CURRENT SITUATION:
> > > > > >
> > > > > > I can start up in YDL, move around and configure in KDE.
> > > > > > I can shut down in YDL.
> > > > > > I do not, on startup, have the option of starting in the Mac
> > > > > > environment
> > > > > >
> > > > > > from the startup prompt (no "M" is displayed). I cannot find MOL
> > > > > > though I installed an "Everything" package.
> > > > > >
> > > > > > In order to switch to Mac, I have to Exit YDL, shut down,
> > > > > > disconnect the YDL drive, then restart (oddly since the YDL
> > > > > > installation it now takes
> > > > > > longer by nearly 2 min to start MAC. Seems to hang at the screen w/
> > > > > > the first appearance of the cursor).
> > > > > >
> > > > > > I would like to be able to configure YDL to have the Mac, YDL, MOL
> > > > > > startup options, recognizing Mac on the other disk, if this is
> > > > > > possible.
> > > > > >
> > > > > >
> > > > > >
> > > > > > ---SYSTEM CONFIGURATION---
> > > > > >
> > > > > > ==B+W G3-300
> > > > > > ==System: Mac OS 8.6
> > > > > > ==704 MB Ram
> > > > > > ==Virtual memory: off
> > > > > >
> > > > > > ==+CD Drive ATA 0 ID =0
> > > > > > ==+ Iomega Zip ATA0 ID=1
> > > > > >
> > > > > > ===+= 6 Gig Quantum HD - Internal ATA1 ID=0 (to motherboard)
> > > > > > Partitions: 1 - Format HFS
> > > > > > Name: YDL
> > > > > > Jumpered: Default (Master) Current YDL Installation
> > > > > >
> > > > > > =+ Sonnet PCI card
> > > > > >
> > > > > > ===+= 40 Gig Quantum HD - SCSI Bus1 ID=0
> > > > > > Partitions: 2 - Format HFS+
> > > > > > Jumpered: Cable Select
> > > > > > ======+=Partition 1
> > > > > > Name: Darwin-finity- Currently used for Primary
> > > > > > Mac OS 8.6
> > > > > > ======+=Partition 2
> > > > > > Name: Darwin-bkup- Intended for FUTURE MAC OS 9
> > > > > > - OS X install/
> > > > > > Backup of current system / storage
> > > > > >
> > > > > > ===+= 20 Gig Quantum HD - SCSI Bus1 ID=1
> > > > > > Partitions: 1 - Format HFS+
> > > > > > Name: andbeond
> > > > > > Jumpered: Default (Master) Currently used for
> > > > > > Applications
> > > > > >
> > > > > > ===+= 30 Gig Quantum HD - SCSI Bus1 ID=2
> > > > > > Partitions: 1 - Format HFS+
> > > > > > Name: quantum
> > > > > > Jumpered: Default (Master) Currently used for Scratch
> > > > > > Disk/ Storage
> > > > > >
> > > > > >
> > > > > > Thanks again and a better NEW YEAR to all,
> > > > > >
> > > > > > CL
> > > > > >
> > > > > >
> > > > > >
> > > > > > THE WISDOM OF WILL ROGERS
> > > > > > "There are three kinds of men. The one that
> > > > > > learns by reading. The few who learn by
> > > > > > observation. The rest of them have to pee
> > > > > > on the electric fence for themselves."



This archive was generated by hypermail 2a24 : Tue Jan 01 2002 - 21:28:23 MST