Re: YDL 2.0 & 6400/200


Subject: Re: YDL 2.0 & 6400/200
From: Philippe L. Houze (plhydl@blackdiamondltd.com)
Date: Wed Jun 13 2001 - 12:31:55 MDT


Lucky you !!!

On my 9600/360 It stops after "booting..."

I have been trying to set it up since May 31st with no luck.
But according to Dan Burcaw, only a handful of people had installation
problems...
and a couple of bad disks...

Anyone having succeeded to install and run YDL 2.0 on "Old World" PPC?

Philippe.

----- Original Message -----
From: Mark Jaffe <wizards@wizdev.net>
To: <yellowdog-general@lists.yellowdoglinux.com>;
<support@terrasoftsolutions.com>
Sent: Wednesday, June 13, 2001 12:05 PM
Subject: Re: YDL 2.0 & 6400/200

> I got the 2.4.4 kernel installed on my SMP 8500 and tried booting.
Following
> is a transcript of the boot messages. Does anyone have a clue as to what
> this means and how I can make it work?
>
> Welcome to Linux, kernel 2.4.4-1asmp
>
> started at: 0x00000000
> linked at: 0xc0000000
> frame buffer at: 0x94c00210 (phys), 0x94c00210 (log)
> klimit: 0xc0356910
> MSR: 0x00000042
> HID0: 0x8000c084
>
> booting...
> pmac_init(): exit
> id mach(): done
> MMU: enter
> MMU: hash init
> hash: enter
> hash: found piece
> hash: patch
> hash: done
> MMU: mapin
> MMU: setbat
> MMU: exit
>
> xmon uses screen and keyboard
> setup_arch: enter
> setup_arch: bootmem
> arch: exit
> smp_psurge_probe_done
> smp_psurge_kick_cpu
> smp_psurge_kick_cpu - done
> found cpu1
> smp_commence
>
> cpu1: vector 300 at pc=c0017f8c, lr=c0017eb4, msr=1032, sp=c04fbf80,
> [c04fbed0]
> dar=fffffff4, dsisr=40000000
> current = c04fa000, pid=0, comm=swapper
> 1:mon>
> ============================================================
> Mark Jaffe | (408) 972-9638 (home)
> Chief Wizard | (408) 807-1530 (cell/page/voicemail)
> Computer Wizards | (425) 795-6421 (FAX)
> wizards@wizdev.net | http://www.wizdev.net/
>
>



This archive was generated by hypermail 2a24 : Wed Jun 13 2001 - 11:39:54 MDT