Re: YDL 2 Install - G4 Cube and 15" LCD


Subject: Re: YDL 2 Install - G4 Cube and 15" LCD
From: A S Hodel (a.s.hodel@Eng.Auburn.EDU)
Date: Tue Jun 26 2001 - 12:12:51 MDT


[this looks like a duplicate to kai far choong's problem]

Do these arguments also work for the apple 17" Lcd display? I've
tried several different approaches, but consistently the screen goes
black just after i get the messages:
Elf32 kernel loaded.
loading ramdisk

[black screen]

the install-text option is not listed in the <TAB> menu on the install
cd: I have

hd-install hd-install-novideo install
install-novideo install-gui cd-linux
cd-linux-novideo

I've tried using install, install-novideo, both with and without
the kernel commands listed below.

I ordered a cube with Cd-RW drive and a Rage 128 card (not the new Nvidia).
Is there a way to confirm that I've got the right video card?

i purchased support, but i thought to try this list to see if any other
users have had success.

>On Wednesday 13 June 2001 08:12, you wrote:
>> Has anyone had any luck with installing YDL 2.0 on a G4 Cube with the
>> 15" LCD display? I get the initial
>> prompt from yaboot then, whether I use the default GUI installer or type
>> install to use the text based installer, I get to a point where the
>> screen sys "Booting..." and it hangs. The engineers notes mention
>> passing video parameters at the boot prompt but nothing about how to
>> pass these (or if they are needed) when installing.
>
>Rich,
>
>What type of video card do you have?
>The video arguments go something like this... at the yaboot "boot: " prompt,
>type:
>
>install video=aty128fb:vmode:14
>
>(for GUI)
>
>or
>
>install-text video=aty128fb:vmode:14
>
>(for text)
>
>--
>
>Regards,
>Dan Burcaw
>Terra Soft Solutions, Inc.

-- 
A. S. Hodel 200 Broun Hall Dept. Elect. & Comp. Eng., Auburn Univ. AL 
36849-5201
http://www.eng.auburn.edu/~scotte   334 844 1854  Fax: -1809



This archive was generated by hypermail 2a24 : Tue Jun 26 2001 - 11:18:07 MDT