Subject: Re: Open Firmware Question
From: BX (Bitch_Trix@mac.com)
Date: Fri Mar 30 2001 - 14:40:07 MST
At 15:22 -0500 03/30/01, Adam W. Rodenberger wrote:
>
>Hello,
>
>Please help...
>
>I typed in the following command to change the iMac's Open Firmware.
> setenv boot-device ht:,\\yaboot
>
>What is it to change it back so that it will boot into Mac OS?
>
>Thank you in advance for helping!
>
>Adam
Zap the PRAM (parameter RAM).
Hold down command, option, P, and R after the system chime, and continue to
hold till it reboots 3 times. In other words, hold it down till you hear
the system chime 3 times. Sometimes just once is enough, but Apple has told
me 3 times will make sure its reset. (at least, thats what their tech guy
told me 5 years ago when i had a monitor problem).
BTX
This archive was generated by hypermail 2a24 : Fri Mar 30 2001 - 14:44:13 MST