Subject: still no modem sound
From: Dan (dan.kortschak@adelaide.edu.au)
Date: Thu May 18 2000 - 17:36:06 MDT
Hi, I've got ppp and everything else fine for dial up, except I can still not
get the dialing over the speaker. Sound works for eveything else, so I was
wondering through which channel the modem is sent for audio and any
suggestions that might help. I short, does
anybody know why I can't hear the modem? (I'm using the versions in CS1.2
(wvdial 1.41) on an iMac revD)
Thanks
Dan Kortschak
here are the relevant bits of wvdial.conf (which does get me a connection BTW).
[Modem0]
Modem = /dev/ttyS0
Baud = 115200
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0
SetVolume = 1
Dial Command = ATDT
Init4 = ATM1L3
[Dialer Defaults]
Modem = /dev/ttyS0
Baud = 115200
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0
SetVolume = 1
Dial Command = ATDT
Init4 = ATM1L3
[bits cut]
NB. dialing account desc inherits Modem0
-- ____________________________________________________________ .`.`o o| ,\__ `./`r Dan Kortschak <\/ \_O> O Department of Genetics phone:+61 8 8303 4863 "|'...'.\ University of Adelaide fax :+61 8 8303 4399 ' :\ Australia 5005 email:dan.kortschak@adelaide.edu.au : \
This archive was generated by hypermail 2a24 : Thu May 18 2000 - 18:32:35 MDT