Subject: Re: What kernel do I have to use for my iMac 400 DV ?????
From: Filippo Fraternali (filippo.fraternali@tin.it)
Date: Fri Nov 16 2001 - 03:32:11 MST
Il giorno 16-11-2001 9:54, Jeroen Diederen, jdiederen@epo.org ha scritto:
> You managed to get it worked under 2.2.19 ? I will give it a try using the
> information I already gathered from the older mailing lists. If it does not
> work I
> will send you an Email.
>
> Jeroen
>
Have a look to this message:
"http://lists.yellowdoglinux.com/yellowdog-general/July01/0204.html"
I basically follow it. Note that when you will asked to chose a device there
is no USB device as it is written in this thread, you must chose LPD/LPR and
put "usb:/dev/usb/lp0".
Once obtained "cups" you can also try this command line installation.
[root@fomalhaut]# lpinfo -v
network socket
network http
network ipp
network lpd
serial serial:/dev/ttyS0?baud=115200
serial serial:/dev/ttyS1?baud=115200
...
direct usb:/dev/usb/lp0 *** check if you have this ***
[root@fomalhaut]# /usr/sbin/lpadmin -p lp0 (*** name of the printer) -E -v
usb:/dev/usb/lp0 -m stcolor.ppd *** this is the driver for Epson Stylus
Color, you need to change it ***
[root@fomalhaut]# /usr/sbin/lpadmin -d lp0
[root@fomalhaut]# /usr/bin/enable lp0
good luck,
filippo
This archive was generated by hypermail 2a24 : Fri Nov 16 2001 - 03:44:29 MST