Subject: Re: SCSI troubles
From: Timothy A. Seufert (tas@mindspring.com)
Date: Mon Oct 29 2001 - 18:26:41 MST
At 7:39 PM -0400 10/29/01, Gavin Hemphill wrote:
>You need to look closely at the termination jumpers on the drives in your
>original configuration. Make sure that if the first drive in the chain
>(physical not SCSI ID) is terminated then the replacement must be as well.
>Similarly if the last drive is terminated and you add another drive, remove
>the termination and make sure the last drive is terminated.
Generally speaking only the *last* drive in the chain should be
terminated. Termination at the start of the chain is usually
provided by the motherboard or host adapter.
-- Tim Seufert
This archive was generated by hypermail 2a24 : Mon Oct 29 2001 - 17:37:14 MST