Subject: PowerBook IrDA HotSync
From: Paul J. Lucas (pjl@best.com)
Date: Tue Sep 12 2000 - 19:23:05 MDT
I'm using a PowerBook G3 (Lombard), kernel 2.2.17, and want to
HotSync a Palm Pilot via the IrDA port. I built the kernel
with:
CONFIG_IRDA=m
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
COMFIG_IRDA_COMPRESSION=y
CONFIG_IRTTY_SIR=m
CONFIG_IRPORT_SIR=m
(Which is the minimal set of options for doing just Pilot
sync'ing, anyway?)
I set up things as:
irmanager -d 1
ln -s ttyS1 /dev/pilot
irattach /dev/pilot
According to /var/log/messages, things look like the load
correctly without error.
However, when I run:
pilot-xfer --backup /tmp/pilot
and tap the HotSync button on the Pilot screen, nothing
happens. Anybody got this working? If so, please describe
your configuration. Thanks.
- Paul
This archive was generated by hypermail 2a24 : Tue Sep 12 2000 - 19:28:45 MDT