Subject: LaserWriter IIG mac --> ip address
From: Jeff Ross (jeffross@vcn.com)
Date: Thu Sep 21 2000 - 17:41:28 MDT
I'm putting my LaserWriter IIG on the ethernet. Does anyone know how to map
the mac address of the hardware to an ip address?
Thanks!
Jeff Ross
Cheyenne, WY
----------
>From: dsbelile <dsbelile@mediaone.net>
>To: yellowdog-general@lists.yellowdoglinux.com
>Subject: Re: SSH mentor needed :-)
>Date: Wed, Sep 20, 2000, 8:42 PM
>
> an rpm install would be at : /etc/ssh/sshd.config edit it so that :
>
> passwd authuentication = no
> x11forwarding = yes
>
> your dir persmissions should be 0700 for .ssh
> and 0644 for authorized_keys inside the .ssh dir.
>
> like ~home/.ssh/auhtorized_keys
>
> if no one has told you... when you setup and client for ssh copy identity.pub
> to your ~home/.ssh dir and :
>
> mv identity.pub authorized_keys
>
> hope this helps....
>
> Jeff Ross wrote:
>
>> Hi--
>>
>> If someone can tell me just exactly how you use ssh to forward X11, I would
>> be forever grateful. I know I'm missing something obvious, but I am missing
>> it...
>>
>> Thanks in advance,
>>
>> Jeff Ross
>> Cheyenne, WY
>
This archive was generated by hypermail 2a24 : Thu Sep 21 2000 - 17:47:41 MDT