Re: YDL and supported NIC's

Subject: Re: YDL and supported NIC's
From: Craig (craig@cy55033-a.rdondo1.ca.home.com)
Date: Wed Sep 27 2000 - 14:37:32 MDT

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Next message: jonathan: "cs 1.2.1"
• Previous message: William F. Hostman: "Re: HS Acess question"
• In reply to: Morten Rnseth: "YDL and supported NIC's"
• Next in thread: antadam: "Re: YDL and supported NIC's"
• Next in thread: goo: "Re: newbie help needed"
• Reply: Craig: "Re: YDL and supported NIC's"

I'm using the G4's GMAC with a Farallon FastEtherTX10/100 card in a setup
 like you describe, as an ipchains and ipmasq firewall. No problems with the
Farallon card ever; got it
because the built-in ethernet wasn't supported for a while.

Good luck,
Craig

>Hi,
>
>On the YDL support page the following devices are supported as being
>supported, namely MACE, BMAC, BMAC+, and DEC 21041 ethernet interfaces.
>Does anybody have any experience in adding extra cards to their machines?
>We are about to set up a firewall using 'ipchains' and I'd just like to
>sample others experience before we shop cards.
>
>Thanks in advance.
>
>Cheers,
>
>
>-Morten
>
>---------------------------------------------------------------
>Coil AS €€€€€€€€€€‘ΡΡΐθΌ½έέάΉ½₯°ΉΉΌ(ω5½ΙΡ•Έ1•ΙΝ­…ԁKαΉΝ•Ρ €€€€€€€€€€΅…₯±ΡΌι΅½ΙΡ•ΈΉΙ½ΉΝ•Ρ‘
½₯°ΉΉΌ(ω-…Ι•ΉΝ±εΝЁ±³€€Δِ€€€€€€€€€€€€€Q±˜Έθ€ Πά€€ΘΘΤΠ€ΔΰΘΐ(ψΐΘάΰ=Ν±Ό€€€€€€€€€€€€€€€€€€€€€€€…ΰ€θ€ Πά€€ΘΘΤΠ€ΔΰΘΔ(ω9½Ιέ…δ€€€€€€€€€€€€€€€€€€€€€€€€€€5½ˆΈθ€ Πά€€δΜΠΜ€ΠΜΤά(ψ€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€% D€θ€ΘΤΔΨΜΐΰΐ(

• Next message: jonathan: "cs 1.2.1"
• Previous message: William F. Hostman: "Re: HS Acess question"
• In reply to: Morten Rnseth: "YDL and supported NIC's"
• Next in thread: antadam: "Re: YDL and supported NIC's"
• Next in thread: goo: "Re: newbie help needed"
• Reply: Craig: "Re: YDL and supported NIC's"

This archive was generated by hypermail 2a24 : Wed Sep 27 2000 - 21:43:25 MDT