Subject: RE: Problems with YDL 2 Installation
From: Shawn Dunn (osirusg@yahoo.com)
Date: Fri Sep 07 2001 - 09:27:48 MDT
I recently installed on a 6360 with a similar setup, and with the exception
of the X11 install not working, it went off without a hitch, not sure where
you're getting tripped up =[
--SF
-----Original Message-----
From: Irena and Richard Jenkins [mailto:rjenkins@pop.alphalink.com.au]
Sent: Thursday, September 06, 2001 8:15 PM
To: yellowdog-general@lists.yellowdoglinux.com
Subject: Problems with YDL 2 Installation
Greetings People !!
I have had limited success with Yellowdoglinux version 1.2.1 so I
thought I'd live dangerously and try my hand with YDL 2. Nice
installer ... should be a breeze! Not such a good idea for me
because I am stuck at the installation stage.
These are the details of my machine...
Macintosh 6360
80 meg RAM
1.5 Gig partition for Linux
60 meg swap partition
15 inch Apple monitor
L2 cache is on the way!
My installation begins after selecting the 'bootX' segment of Control
Panels ... and then some hard disk activity leads to my screen
blanking and the install starting. I get a blank screen and then the
message: Welcome to linux, kernel 2.2.19-1i. Then following lines
of text refer to Start, frame buffer, etc. and the screen displays
"booting ..."
Then there is hard disk activity and then nothing (for 10 minutes) so
I feel it's safe to say nothing.
Feeling extra brave I tried the vmlinux kernel from my earlier
version. Thisstarted ... but crashed when USB was mentioned! Is
there something generally wrong with 2.2.19-1 ... and ought I look
for an alternative kernel? Where should I go for this one?? Maybe
my disk has a corruption at this point ... I know this can happen.
Can someone on the list please assist me to get this thing INSTALLED?
Thanks for all/any help.
Richard
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2a24 : Fri Sep 07 2001 - 08:32:04 MDT