Re: Can't boot RAM disk on upgraded 9600

Subject: Re: Can't boot RAM disk on upgraded 9600
From: Robert Vogt IV (robert@arborhost.com)
Date: Tue Sep 25 2001 - 10:59:01 MDT

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Next message: BX: "Mac Firmware update.."
• Previous message: Pete Peters: "RE: Can't boot RAM disk on upgraded 9600"
• In reply to: Adrian Finn: "Can't boot RAM disk on upgraded 9600"
• Next in thread: BX: "Mac Firmware update.."
• Reply: Robert Vogt IV: "Re: Can't boot RAM disk on upgraded 9600"

        Adrian,

> Welcome to Linux Kernel 2.2.19 - 1k
>
> Started at: 0x00000000
> Linked at: 0xc0000000
> Framebuffer at: 0x96008000 (phys), 0x96008000(log)
> MSR: 0x00000042
> HID0: 0x0291c22c
> ICTC: 0x00000000
>
> Booting Linux.....
>
>
>
> It then hangs for several minutes not doing anything, after a while it will
> reboot itself.
>
> I suspect this is something to do with the Sonnet card as I successfully
> installed LinuxPPC in the past when I had 2 SCSI Hard Drives.
>
> Do I need to use another Kernel or do something else?

        Looks like a kernel compiled without console
support... Hmmm. Try re-installing?

                        -Robert

• Next message: BX: "Mac Firmware update.."
• Previous message: Pete Peters: "RE: Can't boot RAM disk on upgraded 9600"
• In reply to: Adrian Finn: "Can't boot RAM disk on upgraded 9600"
• Next in thread: BX: "Mac Firmware update.."
• Reply: Robert Vogt IV: "Re: Can't boot RAM disk on upgraded 9600"

This archive was generated by hypermail 2a24 : Tue Sep 25 2001 - 10:08:18 MDT