Subject: boot problem with YDL 1.1 on a B&W G3 rev. 2
From: Robert Fout (rfout@mahi.damien.edu)
Date: Fri Feb 18 2000 - 21:29:56 MST
Hi all,
I just installed YDL 1.1, and couldn't get it to boot properly with the
stock kernel and BootX 1.1.1
So I downloaded kernel 2.2.10 and bootX 1.1.3, and this is as far as it will
boot (I am booting linux off a Jaz 1GB (128 MB of swap, the rest ext2) with
a 2930 SCSI card (and MacOS 8.6 off an ATAPI Zip), and have "hda=none
hdb=none" in the kernel args in bootx, also have 'no video driver' and 'G3
cache enabled' checked.
attempt to access beyond end of device
08:04: rw=0, want=1032204, limit=914124
EXT2-fs error (device sd(8,4)): ext2_read_inode: unable to read inode block
- inode=25
/etc/rc.d/rc.sysint: etc/rc.d/init.d/functions: Input/output error
INIT: Entering runlevel: 3
/etc/rc.d/rc: /etc/rc.d/init.d/functions: Input/output error
/etc/rc.d/rc: /var/run/runlevel.dir: Read-only file system
/etc/rc.d/rc: action: command not found
INIT: Id ³1² respawning too fast: disabled for 5 minutes
INIT: Id ³2² respawning too fast: disabled for 5 minutes
INIT: Id ³3² respawning too fast: disabled for 5 minutes
INIT: Id ³4² respawning too fast: disabled for 5 minutes
INIT: Id ³5² respawning too fast: disabled for 5 minutes
INIT: Id ³6² respawning too fast: disabled for 5 minutes
INIT: no more process left in this runlevel
What the heck can I do to get this to boot?
Bob
---------------------------------------
"The knack to flying is learning how to
throw yourself at the ground and miss."
>From "Life the Universe and Everything"
by Douglas Adams
Robert Fout
MacOS Guru and MkLinux User
rfout@damien.edu
http://osx.damien.edu/rfout/
ICQ# 48433406
This archive was generated by hypermail 2a24 : Wed Mar 01 2000 - 00:07:11 MST