Neil Jolly (jollyn@cadvision.com)
Wed, 07 Jul 1999 23:26:10 -0600
I'm trying to burn a cd under a yellowdog/linuxppc hybrid system, on a
G3 266/96mb ram. I am getting a consistent error message, which reads as
follows:
Cdrecord release 1.8a22 Copyright (C) 1995-1999 Jörg Schilling
scsidev: '2,0'
scsibus: 0 target: 2 lun: 0
Device type : Removable WORM
Version : 2
Response Format: 2
Capabilities : SYNC LINKED
Vendor_info : 'SONY '
Identifikation : 'CD-R CDU926S '
Revision : '1.1g'
Device seems to be: Sony CDU-924S.
Using driver for Sony CDU-924 (sony_cdu924).
Driver flags : SWABAUDIO
Starting to write CD/DVD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 9 seconds.8
seconds.7 seconds.6 seconds.5
seconds.4 seconds.3 seconds.2
seconds.1 seconds.
CDB: F1 00 00 00 00 00 00 00 00 00
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 02 06 89 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x89 Qual 0x00 (inappropriate command) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.009s timeout 480s
/opt/schily/bin/cdrecord: Input/output error. finalize: scsi sendcmd:
retryable error
status: 0x2 (CHECK CONDITION)
CD recording process finished.
As per some previous posts I hav run the command echo '16000000' >
/proc/sys/kernel/shmmax to avoid the infamous shmget error, and sure
enough I don't get that. Any ideas, or anybody else run into this?
Neil
This archive was generated by hypermail 2.0b3 on Sat Jul 31 1999 - 11:30:03 MDT