Dan Burcaw (dburcaw@terraplex.com)
Tue, 8 Jun 1999 19:37:57 -0600 (MDT)
On Tue, 8 Jun 1999, Roesslet, Bryan W. wrote:
> OK - I found it and it's there, and /etc/rc.d/init.d/sshd start shows that
> the service started.
>
> When I try to reach the machine via an ssh client, however, I received the
> error message:
>
> Server PTY request failed.
Make sure first that in your /etc/fstab is:
none /dev/pts devpts mode=0622 0 0
Second, are you on an ANS?
>
> That's an unfamiliar one to me.
>
> Any ideas??
>
> Bryan
>
> -----Original Message-----
> From: Dan Burcaw [mailto:dburcaw@terraplex.com]
> Sent: Tuesday, June 08, 1999 5:21 PM
> To: Roesslet, Bryan W.
> Subject: RE: install-ssh-1.0.2-1.ppc.rpm
>
>
>
> Are you sure it installed?
> If the rpms were installed that file would be there.
>
> Do this: rpm -qa |grep ssh
> what does it show?
>
> > Could you go a bit more step-by-step?
> >
> > Bryan
> >
> > -----Original Message-----
> > From: Dan Burcaw [mailto:dburcaw@terraplex.com]
> > Sent: Tuesday, June 08, 1999 4:59 PM
> > To: Roesslet, Bryan W.
> > Cc: 'yellowdog-general@lists.yellowdoglinux.com'
> > Subject: Re: install-ssh-1.0.2-1.ppc.rpm
> >
> >
> >
> > /etc/rc.d/init.d/ssh start
> >
> >
> > On Tue, 8 Jun 1999, Roesslet, Bryan W. wrote:
> >
> > > I've downloaded and rpm'ed in the above. It shows that the rpm has been
> > > installed, but I don't see it as a service.
> > >
> > > What do I need to do to complete the istallation of ssh??
> > >
> > > Thanks,
> > > Bryan
> > >
> >
> >
> > Dan
> >
> > Terra Soft Solutions, Inc.
> > email: dburcaw@yellowdoglinux.com
> > website: http://www.yellowdoglinux.com/
> >
> >
>
>
> Dan
>
> Terra Soft Solutions, Inc.
> email: dburcaw@yellowdoglinux.com
> website: http://www.yellowdoglinux.com/
>
>
Dan
Terra Soft Solutions, Inc.
email: dburcaw@yellowdoglinux.com
website: http://www.yellowdoglinux.com/
This archive was generated by hypermail 2.0b3 on Wed Jun 30 1999 - 11:30:08 MDT