Subject: SCSI bus reset detected
From: Paul J. Lucas (pjl@barefooters.org)
Date: Sun Mar 05 2000 - 09:50:26 MST
OK, a more serious problem: I've just booter my PowerBook G3
(Lombard) and it goes into an infinite loop of:
mesh_reset 2
mesh: SCSI bus reset detected: waiting for end...done
scsi: aborting command due to timeout : pid 0, scsi 0, channel 0, id 0, lun 0 0x00 00 00 00 00
mesh_abort(c7fc1800)
mesh: state at c7fc1a78, regs at cc31800, dma at cc31a000
ct= 100 seq= c bs=6000 fc= 0 exc= 0 err= 0 im= 7 int= 0 sp= 2
dma stat=e0 cmdptr=7fb8010
phase=0 msgphase=0 conn_tgt=0 data_ptr=0
dma_st=0 dma_ct=0 n_msgout=0
target 0: req=c7fc1800 goes_out=0 saved_ptr=0
SCSI host 0 abort (pid 0) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
I just reset it and now it's booting OK. I have had this
problem before. It seems like 1 out of every 5 or so boots it
happens.
(I shut it down using "poweroff".)
- Paul
This archive was generated by hypermail 2a24 : Sun Apr 02 2000 - 21:09:29 MDT