Subject: Re: CS 1.2 : can't open dependencies /lib/modules/2.2.6-16...
From: Philippe SENOT (senot@ipc.sciences.univ-metz.fr)
Date: Thu Mar 16 2000 - 10:10:17 MST
Thanks,
But the story is continueing ...
At 13:11 16/03/2000 +0100, you wrote:
>Hi,
> > depmod -a wrote a error for the entire modules :
> > unresolved symbols in /lib/modules/2.2.15-2.9.0/net/pcnet32.o
> >
> > and, modprobe pcnet32 wrote,
> > /lib/modules/2.2.15-2.9.0/net/pcnet32.o was compiled for kernel
> > 2.2.15-2.9.0 while this activ kernel is 2.2.6-16bprep.
> >
> > Now I think it's very strange that my system works in 2.2.6-16bprep
> (uname
> > -r) but the /boot directory contains the system.map and others for the
> > 2.2.15 !!!
> >
> > What is the problem ?
>
>Seems to me that you boot your system with kernel 2.2.6-...
>The installation of CS 1.2 installs kernel 2.2.15... and corrosponding
>modules to /boot.
>But the kernel which is booted is sitting on your PReP boot partition. I
>don't know about CS 1.2 installation procedure concerning this, since I
>have still CS 1.1.
>I suggest to put zImage versin 2.2.15... that belongs to the kernel in
>/boot to the PReP boot partition. The zImage file should be found in /boot
>as well named zImage-VERSION.or.so.CHRP.or.something.like that. Use
>
> dd if=/boot/zImageFILENAME of/dev/sdYOUR_PReP_partition
>
>to install. Be careful, if you dd to the wrong partion you will destroy it
>completely!
>
I had understanded
>If kernel version and modules do match it should work. If there still
>problems try to compile your own kernel.
>
>Bye the way which RS/6000 do you have?
It's a PReP system, type 7248, 43 P 120 Mhz.
> > Re-thanks for helps
>
>No, point...
>
> Good luck
>
> Christoph
-----
[ Philippe SENOT | Tel. (+33) 03.87.31.58.63 ]
[ Responsable Service Info du LPMC | Fax. (+33) 03.87.31.58.01 ]
[ Institut de Physique,1 Bd Arago | Abroad replace 03 by 3 above ]
[ 57078 METZ Cedex 3, FRANCE | senot@ipc.sciences.univ-metz.fr]
This archive was generated by hypermail 2a24 : Sun Apr 02 2000 - 21:09:31 MDT