Subject: Re: Kernel 2.2.12-2.ppc.rpm install, woe is me!
From: Bernie Mentink (ebike@paradise.net.nz)
Date: Sun Oct 10 1999 - 18:22:34 MDT
Thanks Dan,
I got the file ok, I guess I tried to access it too soon after you placed
it, proberly accessed
before you set permissions.
Most of 2.2.12 is up-and-running, I got the mouse working with the
suggestion you gave Evan Read,
however the keyboard mapping is still wrong. I tried setting the map to
"mac-us-ext" or "mac-us-std"
type "adb" but the backslash/pipe symbol key acts as a backspace and the
delete key doesn't act as a backspace anymore.
Is the above suggestions valid for a non-us iMac?
In the past the mapping that has worked was type "usb" and the "usb-us"
keymap, however like Evan this
screwed up the whole mapping with 2.2.12. Any suggestions Dan?
Also, the USB messages have changed. The HP Deskjet printer is no longer
reckognised ( in name) and I get a huge printout.
I will post the printout at the end of this message.
Cheers,
Bernie.
nBurcaw wrote:
> > Dan,
> > Tried to get the file vmlinux.gz ... it asks for password & userID???
> > Can you remove this please.
>
> Are you logging in as anonymous?
>
> Dan
>
> Terra Soft Solutions, Inc.
> Yellow Dog Linux
> "The Ultimate Companion for a Dedicated Server"
> http://www.yellowdoglinux.com/
-- -------------IMAC YELLOWDOG LINUX-------------- Bernie Mentink Email: ebike@paradise.net.nz -----------------------------------------------usb-ohci: host controller operational USB new device connect, assigned device number 1 Found 02:09 Found 04:09 Found 05:07 parsed = 25 len = 0 USB hub found hub: 4-ports detected hub: individual port power switching hub: standalone hub hub: individual port over current protection hub: power on to power good time: 100ms hub: hub controller current requirement: 80mA hub: port 1 is removable hub: port 2 is removable hub: port 3 is removable hub: port 4 is removable hub: local power source is good hub: no over current condition exists USB hub 1: enabling power on all ports hub: port 1 connection change USB new device connect, assigned device number 2 USB new device connect, assigned device number 3 Found 02:09 Found 04:09 Found 05:07 Found 05:07 parsed = 32 len = 224 Found 04:09 Found 04:09 Found 05:07 Found 05:07 Expected descriptor 04/09, got 00/03 - skipping 03 00 01 Expected descriptor 04/09, got 05/04 - skipping 04 05 00 02 Short descriptor usb: 201 bytes of extra configuration data left Found 02:09 Found 04:09 Expected descriptor 05/07, got 21/09 - skipping 09 21 00 01 00 01 22 40 00 Found 05:07 parsed = 34 len = 0 Unknown new USB device: Length = 18 DescriptorType = 01 USB version = 1.00 Vendor:Product = 03f0:0304 MaxPacketSize0 = 8 NumConfigurations = 1 Device version = 1.00 Device Class:SubClass:Protocol = 00:00:00 Per-interface classes Configuration: bLength = 9 bDescriptorType = 02 wTotalLength = 0037 bNumInterfaces = 01 bConfigurationValue = 01 iConfiguration = 00 bmAttributes = 40 MaxPower = 2mA
Alternate Setting: 0 Interface: bLength = 9 bDescriptorType = 04 bInterfaceNumber = 00 bAlternateSetting = 00 bNumEndpoints = 02 bInterface Class:SubClass:Protocol = 07:01:01 iInterface = 00 Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 81 (in) bmAttributes = 02 (Bulk) wMaxPacketSize = 0040 bInterval = 00 Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 02 (out) bmAttributes = 02 (Bulk) wMaxPacketSize = 0040 bInterval = 00
Alternate Setting: 1 Interface: bLength = 9 bDescriptorType = 04 bInterfaceNumber = 00 bAlternateSetting = 01 bNumEndpoints = 02 bInterface Class:SubClass:Protocol = 07:01:02 iInterface = 00 Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 01 (out) bmAttributes = 02 (Bulk) wMaxPacketSize = 0040 bInterval = 00 Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 82 (in) bmAttributes = 02 (Bulk) wMaxPacketSize = 0040 bInterval = 00 Manufacturer: Alps Electric Product: M2452 USB HID boot protocol keyboard detected. hub: port 2 connection change USB new device connect, assigned device number 4 Found 02:09 Found 04:09 Expected descriptor 05/07, got 21/09 - skipping 09 21 00 01 00 01 22 32 00 Found 05:07 parsed = 34 len = 0 Manufacturer: Contour Design Product: UniMouse, USB USB mouse found hub: port 3 connection change USB new device connect, assigned device number 5 Found 02:09 Found 04:09 Found 05:07 Found 05:07 Found 05:07 parsed = 39 len = 0 Manufacturer: Iomega Product: USB Zip 100 SerialNumber: 0000000000F404B2 Unknown new USB device: Length = 18 DescriptorType = 01 USB version = 1.00 Vendor:Product = 059b:0001 MaxPacketSize0 = 64 NumConfigurations = 1 Device version = 1.00 Device Class:SubClass:Protocol = 00:00:00 Per-interface classes Configuration: bLength = 9 bDescriptorType = 02 wTotalLength = 0027 bNumInterfaces = 01 bConfigurationValue = 01 iConfiguration = 03 bmAttributes = 40 MaxPower = 0mA
Alternate Setting: 0 Interface: bLength = 9 bDescriptorType = 04 bInterfaceNumber = 00 bAlternateSetting = 00 bNumEndpoints = 03 bInterface Class:SubClass:Protocol = 08:06:50 iInterface = 04 Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 01 (out) bmAttributes = 02 (Bulk) wMaxPacketSize = 0040 bInterval = 00 Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 82 (in) bmAttributes = 02 (Bulk) wMaxPacketSize = 0040 bInterval = 00 Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 83 (in) bmAttributes = 03 (Interrupt) wMaxPacketSize = 0002 bInterval = 20 hub: port 1 reset change hub: port 2 reset change hub: port 3 reset change
This archive was generated by hypermail 2a24 : Tue Nov 02 1999 - 16:20:57 MST