Subject: Re: Powerbook G3 (Lombard) Problem.....
From: Geof Gowan (email@example.com)
Date: Thu Apr 13 2000 - 07:41:53 MDT
I've got YDL CS 1.2 running on a real Frankenstein of a 7500 (XLR8 G3 350
w/1Meg backside cache, ATI Rage 128 VR, and an XLR8 USB card) and
everything was recognized and functioning without undue hassle.
The only weird thing is that YDL only has the G3 running at 195MHz rather
than the 350MHz that I have the dip switches on the card set to. I'm too
new to linux to be able to determine if thats an error or not.
At 09:24 PM 4/12/00 -0400, you wrote:
> Ok well YDL used to run great on my comp but my HD was too small
> for me and I recently bought a 12 GB toshiba for it and have it all set
> up, 8.6 drivers etc, linux partitioned and it installs fine, but when I
> go to boot into linux it says it cant mount the 00:11 partition (its on
> hda11) and says it has a kernel panic rebooting in 180 seconds. Anyone
> know whats up? any help would be greatly apreciated. Also Linux works
> over G3 upgrade cards on older Powermacs correct? (namely a 7500) its
> probably on the web page but I thought Id ask while I was writing. Thanx.
>ICQ - 5473298
>AIM - KrysAddict, or KageNoKuro are ones Im on normaly......
Geof Gowan firstname.lastname@example.org
CLASnet Computer & Network Support
Tech Support Mantra: "Shut down the program. Restart the computer. See if
that fixes the problem." (Repeat as necessary)
This archive was generated by hypermail 2a24 : Sun Apr 23 2000 - 22:14:39 MDT