Subject: stock 2.4.4-1asmp = bad sound, video, kde2, no serial
From: Daniel Gimpelevich (Daniel_Gimpelevich@compuserve.com)
Date: Thu Aug 02 2001 - 10:25:14 MDT
I have a Sawtooth G4/450 AGP with 10/100 Ethernet. I installed ydl2.0, and
the 2.4.4-1asmp RPMs from Tasty Morsels, and hoped to yup anything new. NOT!
I'm on dial-up, and ttyS0 doesn't access the internal modem like earlier
kernels.
The beep you get when backspacing too far in bash, as well as any other
sound, is somehow replaced with a random ear-piercing noise.
Without the novideo option, it's locked into 640x480 until X starts. X
insists on using sync rates the video card (Rage128Pro) does not support,
making a nasty display. According to its docs (Apple service part#
033-1417-A), the ones for 1280x1024 are 60, 75, & 85, and the only one for
1152x870(864?) is 75. I know the guide says to pick only one resolution (I
picked 1024x768), but that doesn't help. (The ydl2.0 errata sheet didn't
help, either.)
With the novideo option, X is very unstable and crashes easily.
In the KDE Control Center, selecting just about any Information module gives
the following error:
There was an error loading the module.
The diagnostics is:
/usr/lib/kde2/libkcm_info.so: undefined symbol: __floatdidf
I have included the output of dmesg and a copy of /var/log/XFree86.0.log;
note near the end of the latter file that kernel module 'r128' couldn't
load. My XF86Config-4 file is the one generated by the setup (or yi) command
for the ViewSonic E790 monitor.
I would appreciate a yup-friendly solution to all of this, so that I can go
to the next steps: making kppp work in this environment, setting up USB
printing, and finally, actually running yup. TIA -DG
-- "No gnu's is good gnu's." --Gary Gnu, "The Great Space Coaster"
Total memory = 512MB; using 2048kB for hash table (at c0400000) Linux version 2.4.4-1asmp (root@kaelta.terraplex.com) (gcc version 2.95.3 20010111 (prerelease/franzo/20010111)) #1 SMP Fri May 4 21:22:55 MDT 2001 Uninorth at 0xf8000000 Uni-N revision: 3, KeyLargo revision: 2 Registered 1 feature controller(s) Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0 Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->1 Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0 CPU0: L2CR is b9000000 PMU driver initialized for Core99 On node 0 totalpages: 131072 zone(0): 131072 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/sdb8 PowerMac using OpenPIC irq controller OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at fc664000 OpenPIC timer frequency is 4.166666 MHz GMT Delta read from XPRAM: -420 minutes, DST: on via_calibrate_decr: ticks per jiffy = 249094 (1494565 ticks) Console: colour dummy device 80x25 Calibrating delay loop... 894.56 BogoMIPS Memory: 508436k available (2044k kernel code, 1136k data, 284k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) POSIX conformance testing by UNIFIX Entering SMP Mode... smp_core99_probe: found 1 cpus PCI: Probing PCI hardware Fixup IO res, dev: 0.10, res_start: 400->802400 Unknown bridge resource 2: assuming transparent PCI->OF bus map: 0 -> 0 1 -> 0 2 -> 1 3 -> 0 PCI:0:10:0: Resource 94000000-97ffffff (f=1208) PCI:0:10:0: Resource 90000000-90003fff (f=200) PCI:2:7:0: Resource 80000000-8007ffff (f=200) PCI:3:f:0: Resource f5200000-f53fffff (f=200) PCI:0:10:0: Resource 00802400-008024ff (f=101) PCI:2:4:0: Resource 00001400-000014ff (f=101) PCI:2:4:0: Resource 80081000-800813ff (f=204) PCI:2:4:0: Resource 80088000-80089fff (f=204) PCI:2:4:1: Resource 00001000-000010ff (f=101) PCI:2:4:1: Resource 80080000-800803ff (f=204) PCI:2:4:1: Resource 80086000-80087fff (f=204) PCI:2:8:0: Resource 80084000-80084fff (f=200) PCI:2:9:0: Resource 80083000-80083fff (f=200) PCI:2:a:0: Resource 80082000-800827ff (f=200) PCI:2:a:0: Resource 8008c000-8008ffff (f=200) PCI: Enabling device 02:04.0 (0014 -> 0017) PCI: Enabling device 02:04.1 (0014 -> 0017) Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 PCI: Enabling device 00:10.0 (0086 -> 0087) aty128fb: Rage128 Pro PF (AGP) [chip rev 0x1] 16M 128-bit SDR SGRAM (1:1) Console: switching to colour frame buffer device 80x30 fb0: ATY Rage128 frame buffer device on PCI input0: Macintosh mouse button emulation pty: 256 Unix98 ptys configured block: queued sectors max/low 337741kB/206669kB, 1024 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx pmac_ide: enabling IDE bus ID 2 pmac_ide: enabling IDE bus ID 0 pmac_ide: enabling IDE bus ID 1 hdc: MATSHITAPD-2 LF-D110, ATAPI CD/DVD-ROM drive ide1 at 0xe51bb000-0xe51bb007,0xe51bb160 on irq 20 hdc: Enabling MultiWord DMA 2 Bogus interrupt -1 from PC = c0005bd8 hdc: ATAPI DVD-ROM DVD-RAM drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x2 loop: loaded (max 8 devices) eth0: GMAC at 00:0a:27:ae:6b:c8, driver v1.4k4 PPP generic driver version 2.4.1 PPP Deflate Compression module registered SCSI subsystem driver Revision: 1.00 sym53c8xx: at PCI bus 2, device 4, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c896 detected sym53c8xx: at PCI bus 2, device 4, function 1 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c896 detected sym53c896-0: rev 0x5 on pci bus 2 device 4 function 0 irq 54 sym53c896-0: ID 7, Fast-40, Parity Checking sym53c896-0: handling phase mismatch from SCRIPTS. sym53c896-1: rev 0x5 on pci bus 2 device 4 function 1 irq 54 sym53c896-1: ID 7, Fast-40, Parity Checking sym53c896-1: handling phase mismatch from SCRIPTS. scsi0 : sym53c8xx-1.7.3a-20010304 scsi1 : sym53c8xx-1.7.3a-20010304 Vendor: SEAGATE Model: ST318203LW Rev: 3700 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST318203LW Rev: 3700 Type: Direct-Access ANSI SCSI revision: 02 scsi2 : SCSI host adapter emulation for IDE ATAPI devices Detected scsi disk sda at scsi1, channel 0, id 0, lun 0 Detected scsi disk sdb at scsi1, channel 0, id 1, lun 0 sym53c896-1-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 15) SCSI device sda: 35566480 512-byte hdwr sectors (18210 MB) Partition check: /dev/scsi/host1/bus0/target0/lun0: [mac] p1 p2 p3 p4 p5 p6 sym53c896-1-<1,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 15) SCSI device sdb: 35566480 512-byte hdwr sectors (18210 MB) /dev/scsi/host1/bus0/target1/lun0: [mac] p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 Linux PCMCIA Card Services 3.1.22 options: [pci] [cardbus] [pm] Intel PCIC probe: not found. Macintosh non-volatile memory driver v1.0 usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Enabling device 02:08.0 (0000 -> 0002) usb-ohci.c: USB OHCI at membase 0xe2087000, IRQ 27 usb-ohci.c: usb-02:08.0, Apple Computer Inc. KeyLargo USB adb: starting probe task... usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Enabling device 02:09.0 (0000 -> 0002) usb-ohci.c: USB OHCI at membase 0xe2089000, IRQ 28 usb-ohci.c: usb-02:09.0, Apple Computer Inc. KeyLargo USB (#2) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hid mouse0: PS/2 mouse device for input0 mice: PS/2 mouse device common for all mice event0: Event device for input0 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 65536 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ds: no socket drivers loaded! EXT2-fs warning: feature flags set on rev 0 fs, running e2fsck is recommended VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 284k init 4k chrp 8k prep hub.c: USB new device connect on bus2/1, assigned device number 2 hub.c: USB hub found hub.c: 3 ports detected hub.c: USB new device connect on bus2/1/1, assigned device number 3 event1: Event device for input1 keybdev.c: Adding keyboard: input1 input1: USB HID v0.01 Keyboard [Alps Electric Apple USB Keyboard] on usb2:3.0 hub.c: USB new device connect on bus2/1/2, assigned device number 4 event2: Event device for input2 mouse1: PS/2 mouse device for input2 input2: USB HID v0.01 Mouse [Logitech USB-PS/2 Mouse] on usb2:4.0 adb: finished probe task... EXT2-fs warning: feature flags set on rev 0 fs, running e2fsck is recommended Adding Swap: 131064k swap-space (priority -1) DMA sound driver installed, using 4 buffers of 32k. EXT2-fs warning: feature flags set on rev 0 fs, running e2fsck is recommended EXT2-fs warning: feature flags set on rev 0 fs, running e2fsck is recommended EXT2-fs warning: feature flags set on rev 0 fs, running e2fsck is recommended eth0 PHY ID: 0x00406212 eth0 Found Broadcom BCM5201 PHY eth0: Link state change, phy_status: 0x782d Link up ! BCM5201 aux_stat: 0x003c full_duplex: 0, speed: 10 NET4: AppleTalk 0.18a for Linux NET4.0
XFree86 Version 4.0.2 / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 18 December 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Operating System: Linux 2.4.4-pre3 ppc [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Thu Aug 2 05:56:56 2001 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (??) unknown. (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "Protocol" "Standard" (**) Option "AutoRepeat" "250 30" (--) Keyboard: CustomKeycodes disabled (**) Option "XkbModel" "macintosh" (**) XKB: model: "macintosh" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (WW) The directory "/usr/share/fonts/default/TrueType" does not exist. Entry deleted from font path. (**) FontPath set to "/usr/lib/X11/fonts/misc:unscaled,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/cyrillic,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi,/usr/share/fonts/default/Type1" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7
ioBase_phys = 0xf0000000 (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.3 XFree86 XInput driver : 0.1 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.0.2, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.3 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:0b:0: chip 106b,0020 card 0000,0000 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:10:0: chip 1002,5046 card 0000,0000 rev 00 class 03,00,00 hdr 00 (II) PCI: 01:0b:0: chip 106b,001f card 0000,0000 rev 00 class 06,00,00 hdr 00 (II) PCI: 01:0d:0: chip 1011,0026 card 0000,0000 rev 05 class 06,04,00 hdr 01 (II) PCI: 02:04:0: chip 1000,000b card 0000,0000 rev 05 class 01,00,00 hdr 80 (II) PCI: 02:04:1: chip 1000,000b card 0000,0000 rev 05 class 01,00,00 hdr 80 (II) PCI: 02:07:0: chip 106b,0022 card 0000,0000 rev 02 class ff,00,00 hdr 00 (II) PCI: 02:08:0: chip 106b,0019 card 0000,0000 rev 00 class 0c,03,10 hdr 00 (II) PCI: 02:09:0: chip 106b,0019 card 0000,0000 rev 00 class 0c,03,10 hdr 00 (II) PCI: 02:0a:0: chip 104c,8019 card 0000,0000 rev 00 class 0c,00,10 hdr 00 (II) PCI: 03:0b:0: chip 106b,001e card 0000,0000 rev 00 class 06,00,00 hdr 00 (II) PCI: 03:0f:0: chip 106b,0021 card 0000,0000 rev 00 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.0.2, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.3 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) Host-to-PCI bridge: (II) Host-to-PCI bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x00 (VGA_EN is cleared) (II) Bus 0 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 1: bridge is at (0:0:0), (-1,1,0), BCTRL: 0x00 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 2: bridge is at (1:13:0), (1,2,2), BCTRL: 0x00 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0x00001000 - 0x00001fff (0x1000) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0x80000000 - 0x801fffff (0x200000) MX[B] (II) Bus 2 prefetchable memory range: (II) Bus 3: bridge is at (0:0:0), (-1,3,0), BCTRL: 0x00 (VGA_EN is cleared) (II) Bus 3 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 3 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 3 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (--) PCI:*(0:16:0) ATI Rage 128 Pro PF rev 0, Mem @ 0x94000000/26, 0x90000000/14, I/O @ 0x0400/8 (II) Addressable bus resource ranges are [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: (II) Active PCI resource ranges: [0] -1 0xf5000000 - 0xf50fffff (0x100000) MX[B] [1] -1 0xf5200000 - 0xf53fffff (0x200000) MX[B] [2] -1 0x80083000 - 0x80083fff (0x1000) MX[B] [3] -1 0x80084000 - 0x80084fff (0x1000) MX[B] [4] -1 0x80000000 - 0x8007ffff (0x80000) MX[B] [5] -1 0x800c0000 - 0x800fffff (0x40000) MX[B] [6] -1 0x80100000 - 0x8013ffff (0x40000) MX[B] [7] -1 0x90020000 - 0x9003ffff (0x20000) MX[B](B) [8] -1 0x90000000 - 0x90003fff (0x4000) MX[B](B) [9] -1 0x94000000 - 0x97ffffff (0x4000000) MX[B](B) [10] -1 0x00001000 - 0x000010ff (0x100) IX[B] [11] -1 0x00001400 - 0x000014ff (0x100) IX[B] [12] -1 0x00000400 - 0x000004ff (0x100) IX[B](B) (II) Inactive PCI resource ranges: [0] -1 0x8008c000 - 0x8008ffff (0x4000) MX[B] [1] -1 0x80082000 - 0x800827ff (0x800) MX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0xf5000000 - 0xf50fffff (0x100000) MX[B] [1] -1 0xf5200000 - 0xf53fffff (0x200000) MX[B] [2] -1 0x80083000 - 0x80083fff (0x1000) MX[B] [3] -1 0x80084000 - 0x80084fff (0x1000) MX[B] [4] -1 0x80000000 - 0x8007ffff (0x80000) MX[B] [5] -1 0x800c0000 - 0x800fffff (0x40000) MX[B] [6] -1 0x80100000 - 0x8013ffff (0x40000) MX[B] [7] -1 0x90020000 - 0x9003ffff (0x20000) MX[B](B) [8] -1 0x90000000 - 0x90003fff (0x4000) MX[B](B) [9] -1 0x94000000 - 0x97ffffff (0x4000000) MX[B](B) [10] -1 0x00001000 - 0x000010ff (0x100) IX[B] [11] -1 0x00001400 - 0x000014ff (0x100) IX[B] [12] -1 0x00000400 - 0x000004ff (0x100) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: (II) All system resource ranges: [0] -1 0xf5000000 - 0xf50fffff (0x100000) MX[B] [1] -1 0xf5200000 - 0xf53fffff (0x200000) MX[B] [2] -1 0x80083000 - 0x80083fff (0x1000) MX[B] [3] -1 0x80084000 - 0x80084fff (0x1000) MX[B] [4] -1 0x80000000 - 0x8007ffff (0x80000) MX[B] [5] -1 0x800c0000 - 0x800fffff (0x40000) MX[B] [6] -1 0x80100000 - 0x8013ffff (0x40000) MX[B] [7] -1 0x90020000 - 0x9003ffff (0x20000) MX[B](B) [8] -1 0x90000000 - 0x90003fff (0x4000) MX[B](B) [9] -1 0x94000000 - 0x97ffffff (0x4000000) MX[B](B) [10] -1 0x8008c000 - 0x8008ffff (0x4000) MX[B] [11] -1 0x80082000 - 0x800827ff (0x800) MX[B] [12] -1 0x00001000 - 0x000010ff (0x100) IX[B] [13] -1 0x00001400 - 0x000014ff (0x100) IX[B] [14] -1 0x00000400 - 0x000004ff (0x100) IX[B](B) (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension XFree86-DRI (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension GLX (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) LoadModule: "pex5" (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a (II) Module pex5: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension X3D-PEX (II) LoadModule: "record" (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.13.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension RECORD (II) LoadModule: "xie" (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a (II) Module xie: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension XIE (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.3 (II) LoadModule: "bitmap" (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Loading font Bitmap (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.1.8 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font FreeType (II) LoadModule: "speedo" (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a (II) Module speedo: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Speedo (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.3 (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.3 (II) LoadModule: "r128" (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o (II) Module r128: vendor="The XFree86 Project" compiled for 4.0.2, module version = 4.0.1 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.3 (II) LoadModule: "ati" (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o (II) Module ati: vendor="The XFree86 Project" compiled for 4.0.2, module version = 6.2.3 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.3 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.1 (II) ATI: ATI driver (version 6.2.3) for chipsets: ati (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI), ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI), ATI Rage 128 RL (AGP), ATI Rage 128 Pro PF (AGP), ATI Rage 128 PR, ATI Rage 128 Mobility LE (PCI), ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP), ATI Rage 128 Mobility ML (AGP) (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP) (II) Primary Device is: PCI 00:10:0 (--) Chipset ATI Rage 128 Pro PF (AGP) found (II) Loading sub module "r128" (II) LoadModule: "r128" (II) Reloading /usr/X11R6/lib/modules/drivers/r128_drv.o (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0xf5000000 - 0xf50fffff (0x100000) MX[B] [1] -1 0xf5200000 - 0xf53fffff (0x200000) MX[B] [2] -1 0x80083000 - 0x80083fff (0x1000) MX[B] [3] -1 0x80084000 - 0x80084fff (0x1000) MX[B] [4] -1 0x80000000 - 0x8007ffff (0x80000) MX[B] [5] -1 0x800c0000 - 0x800fffff (0x40000) MX[B] [6] -1 0x80100000 - 0x8013ffff (0x40000) MX[B] [7] -1 0x90020000 - 0x9003ffff (0x20000) MX[B](B) [8] -1 0x90000000 - 0x90003fff (0x4000) MX[B](B) [9] -1 0x94000000 - 0x97ffffff (0x4000000) MX[B](B) [10] -1 0x8008c000 - 0x8008ffff (0x4000) MX[B] [11] -1 0x80082000 - 0x800827ff (0x800) MX[B] [12] -1 0x00001000 - 0x000010ff (0x100) IX[B] [13] -1 0x00001400 - 0x000014ff (0x100) IX[B] [14] -1 0x00000400 - 0x000004ff (0x100) IX[B](B) (II) resource ranges after probing: [0] -1 0xf5000000 - 0xf50fffff (0x100000) MX[B] [1] -1 0xf5200000 - 0xf53fffff (0x200000) MX[B] [2] -1 0x80083000 - 0x80083fff (0x1000) MX[B] [3] -1 0x80084000 - 0x80084fff (0x1000) MX[B] [4] -1 0x80000000 - 0x8007ffff (0x80000) MX[B] [5] -1 0x800c0000 - 0x800fffff (0x40000) MX[B] [6] -1 0x80100000 - 0x8013ffff (0x40000) MX[B] [7] -1 0x90020000 - 0x9003ffff (0x20000) MX[B](B) [8] -1 0x90000000 - 0x90003fff (0x4000) MX[B](B) [9] -1 0x94000000 - 0x97ffffff (0x4000000) MX[B](B) [10] -1 0x8008c000 - 0x8008ffff (0x4000) MX[B] [11] -1 0x80082000 - 0x800827ff (0x800) MX[B] [12] 0 0x000a0000 - 0x000affff (0x10000) MS[B] [13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [15] -1 0x00001000 - 0x000010ff (0x100) IX[B] [16] -1 0x00001400 - 0x000014ff (0x100) IX[B] [17] -1 0x00000400 - 0x000004ff (0x100) IX[B](B) [18] 0 0x000003b0 - 0x000003bb (0xc) IS[B] [19] 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.0.2, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.3 (II) R128(0): PCI bus 0 card 16 func 0 (**) R128(0): Depth 24, (--) framebuffer bpp 32 (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) R128(0): Default visual is TrueColor (**) R128(0): Option "UseFBDev" (==) R128(0): RGB weight 888 (II) R128(0): Using 8 bits per RGB (8 bit DAC) (**) R128(0): Using framebuffer device (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor="The XFree86 Project" compiled for 4.0.2, module version = 0.0.2 ABI class: XFree86 Video Driver, version 0.3 (--) R128(0): Chipset: "ATI Rage 128 Pro PF (AGP)" (ChipID = 0x5046) (--) R128(0): Linear framebuffer at 0x94000000 (--) R128(0): MMIO registers at 0x90000000 (--) R128(0): BIOS at 0x90020000 (--) R128(0): VideoRAM: 16384 kByte (64-bit SDR SGRAM 1:1) (WW) R128(0): Video BIOS not detected in PCI space! (WW) R128(0): Attempting to read Video BIOS from legacy ISA space! (WW) R128(0): Video BIOS not found! (II) R128(0): PLL parameters: rf=2950 rd=27 min=12500 max=25000; xclk=14038 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/X11R6/lib/modules/libddc.a (==) R128(0): Using gamma correction (1.0, 1.0, 1.0) (II) R128(0): Monitor0: Using hsync range of 30.00-95.00 kHz (II) R128(0): Monitor0: Using vrefresh range of 50.00-200.00 Hz (II) R128(0): Clock range: 12.50 to 250.00 MHz (WW) R128(0): Mode "1600x1200" deleted (hsync out of range) (WW) R128(0): Mode "1280x1024" deleted (hsync out of range) (WW) R128(0): Mode "1800X1440" deleted (hsync out of range) (WW) R128(0): Mode "1800X1440" deleted (hsync out of range) (WW) R128(0): Mode "640x480" deleted (hsync out of range) (WW) R128(0): Mode "800x600" deleted (hsync out of range) (WW) R128(0): Default mode "1792x1344" deleted (bad mode clock/interlace/doublescan) (WW) R128(0): Default mode "1856x1392" deleted (bad mode clock/interlace/doublescan) (WW) R128(0): Default mode "1920x1440" deleted (bad mode clock/interlace/doublescan) (--) R128(0): Virtual size is 1024x768 (pitch 1024) (**) R128(0): Mode "1024x768": 115.5 MHz, 80.2 kHz, 100.0 Hz (==) R128(0): DPI set to (75, 75) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.1 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.0.2, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.3 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.3 (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0x90000000 - 0x90003fff (0x4000) MS[B] [1] 0 0x94000000 - 0x97ffffff (0x4000000) MS[B] [2] -1 0xf5000000 - 0xf50fffff (0x100000) MX[B] [3] -1 0xf5200000 - 0xf53fffff (0x200000) MX[B] [4] -1 0x80083000 - 0x80083fff (0x1000) MX[B] [5] -1 0x80084000 - 0x80084fff (0x1000) MX[B] [6] -1 0x80000000 - 0x8007ffff (0x80000) MX[B] [7] -1 0x800c0000 - 0x800fffff (0x40000) MX[B] [8] -1 0x80100000 - 0x8013ffff (0x40000) MX[B] [9] -1 0x90020000 - 0x9003ffff (0x20000) MX[B](B) [10] -1 0x90000000 - 0x90003fff (0x4000) MX[B](B) [11] -1 0x94000000 - 0x97ffffff (0x4000000) MX[B](B) [12] -1 0x8008c000 - 0x8008ffff (0x4000) MX[B] [13] -1 0x80082000 - 0x800827ff (0x800) MX[B] [14] 0 0x000a0000 - 0x000affff (0x10000) MS[B] [15] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [16] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [17] 0 0x00000400 - 0x000004ff (0x100) IS[B] [18] -1 0x00001000 - 0x000010ff (0x100) IX[B] [19] -1 0x00001400 - 0x000014ff (0x100) IX[B] [20] -1 0x00000400 - 0x000004ff (0x100) IX[B](B) [21] 0 0x000003b0 - 0x000003bb (0xc) IS[B] [22] 0 0x000003c0 - 0x000003df (0x20) IS[B] [drm] failed to load kernel module "r128" (0): [drm] drmOpen failed (EE) R128(0): DRIScreenInit failed! (II) R128(0): Memory manager initialized to (0,0) (1024,4096) (II) R128(0): Reserved area from (0,768) to (1024,770) (II) R128(0): Largest offscreen area available: 1024 x 3326 (==) R128(0): Backing store disabled (==) R128(0): Silken mouse enabled (II) R128(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Dashed Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 18 256x256 slots 6 512x512 slots (II) R128(0): Acceleration enabled (II) R128(0): Using hardware cursor (scanline 3080) (II) R128(0): Largest offscreen area available: 1024 x 3324 (II) R128(0): Direct rendering disabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (**) Option "Protocol" "IMPS/2" (**) Mouse0: Protocol: "IMPS/2" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/mouse" (==) Mouse0: Buttons: 3 (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (II) Keyboard "Keyboard0" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) ioBase_phys = 0xf0000000 [drm] failed to load kernel module "r128" (0): [drm] drmOpen failed (EE) R128(0): DRIScreenInit failed! (II) R128(0): Memory manager initialized to (0,0) (1024,4096) (II) R128(0): Reserved area from (0,768) to (1024,770) (II) R128(0): Largest offscreen area available: 1024 x 3326 (II) R128(0): Acceleration enabled (II) R128(0): Using hardware cursor (scanline 3080) (II) R128(0): Largest offscreen area available: 1024 x 3324 (II) R128(0): Direct rendering disabled
This archive was generated by hypermail 2a24 : Thu Aug 02 2001 - 09:33:47 MDT