Subject: Re: Netatalk
From: Ulrik Sjöström (ulriks@mail.bahnhof.se)
Date: Fri Jul 28 2000 - 10:09:20 MDT
Thanks! I'll try that!
>on 7/28/00 10:27 AM, Ulrik Sjöström at ulriks@mail.bahnhof.se wrote:
>
>> Hi everyone!
>> This is from a total UN*X newbie..
>> I have installed YDL CS 1.2 on a performa 6400/180. And it works like
>> a charm, albeit a bit slow in X.
>> But i cant get appletalk services to start., no matter what i do. I
>> have checked all tha FAQ's i can find on the net. And even though i
>> do exactly as stated, nothing happens. Does anyone have a clue of
>> where to find some thorough documentation on the subject. And, while
>> i'm at it, also about LPR? I cant get the Epson 600 to work either.
>>
>> Best....
>> Ulrik Sjöström
>
>Look in the linux faq-omatic.
>http://www.dartmouth.edu/~jonh/lppc-serve/cache/791.html
>
>There are good instructions there on what you need to do.
>One caveat: the instructions there mention using hstty but what worked for
>me was using 'stty'. You'll see where stty and hstty show up in the filter
>file and in /etc/rc.d/rc.local
>HTH
>Jeff
>
>Also note: first use printtool to set up the printer. Then set up the
>queue. Then set up the filter file (there are a couple lines you'll need to
>add. If you go back into the printtool, you may also need to re-edit the
>filter file.
This archive was generated by hypermail 2a24 : Fri Jul 28 2000 - 10:14:32 MDT