Subject: Re: netatalk
From: SFalken (sfalken@citlink.net)
Date: Sun Oct 14 2001 - 23:33:28 MDT
Ok, I got things sorta working now, my 8.6 machine can see the Share
madeavailable via netatalk on the MkLinux machine, and I have a
LaserwriterIISC (localtalk laserwriter) setup on that 8.6 machine, using the
localtalk bridge to share that printer with the network, how do I setup both
this machine (YDL 2.0) and the Mklinux Machine, to use that printer, over
netatalk?
On Sunday 14 October 2001 07:17, you wrote:
> I can tell you how to set up the server end on YDL. The client end
> is a lot easier, so just read the man page on that.
>
> 1. if appletalk isn't installed in your kernel, you'll need to add the
> module to do that. edit your /etc/conf.modules file and add the
> following
>
> alias net-pf-5 appletalk
>
> 2. edit your /etc/atalk/atalk.conf file and add the following
>
> eth0
>
> eth0 is your ethernet device (it may be eth1 if you have two NIC
> cards). When netatalk is activated at reboot, this line will change
> to something like "eth0 -phase 2 -net 0-65534 -addr 65280.116". This
> change will be provided by netatalk.
>
> 3. Youe /etc/atalk/afpd.conf file should remain empty.
>
> 4. If you need to share a printer, you can provide that in the
> papd.conf file. I have a Performa 6400/200 serving a StyleWriter
> 2400. My papd.conf file is as follows:
>
> lpr-devil:\
>
> :pr=|/usr/bin/lpr -Pstylps:op=netatalk:\
> :pd=/etc/atalk/ppds/APPLE230.PPD:
>
This archive was generated by hypermail 2a24 : Sun Oct 14 2001 - 22:33:25 MDT