Subject: Re: ip masquerading
From: ant (Lunch Lady Industries) (antadam@lunch-lady.com)
Date: Tue Aug 10 1999 - 19:00:43 MDT
can you help me do this??? i'm totally lost on how to do the second
thing (eth0:0). i tired it w/netconf as setting my second card to an
eth0:1 and then the first as eth0. can you give me detailed
instructions please
>Itīs very simple just configure the " ip alias" information on /netconf
>command menu ......
>
>or configure an interface with the name like this eth0:0 like a virtual
>interface into a router and put the ip address that you wish for your
>internal network ...
>
>_____________________________
>Paulo Almas
>FarolDigital New-Business
>http://www.faroldigital.com/
>palmas@faroldigital.com
>Tel.:(62) 286 5120 - Cel.:(62) 9986 1833
>----- Original Message -----
>From: "Andy Schuler" <news.mail@onemain.com>
>To: <yellowdog-general@lists.yellowdoglinux.com>
>Sent: Monday, August 07, 2000 9:10 AM
>Subject: RE: ip masquerading
>
>
> > I've setup a couple of Linux boxes do do firewalling and ip masquerading
>but
> > never with a single interface. You'd have to assign the NIC two ip
> > addresses, one for your internal network and the external one your ISP
>gives
> > you. In doing so you have to convince that interface (probably eth0) that
> > it's sitting on two different networks at the same time. If you figure out
> > how to do that let me know!
> >
> >
> > -shoe
> >
> >
> > -----Original Message-----
> > From: ant (Lunch Lady Industries) [mailto:antadam@lunch-lady.com]
> > Sent: Saturday, August 05, 2000 3:00 PM
> > To: yellowdog-general@lists.yellowdoglinux.com
> > Subject: ip masquerading
> >
> >
> > i'm on a g3 running cs 1.2 and i read some stuff about ip maquerading
> > and i'm wondering if someone can clue me in on something. on macs i
> > just use ipnetrouter and go from the dsl modem to the uplink in the
> > hub and then plug both computers into the hub and use one computer as
> > a router (software duh). on the machine with the ip my isp gives me
> > i can ping everything, but the internal network. would someone
> > please point me in the right direction to configure cs 1.2 to be a
> > software router using 1 ethernet card in the machine instead of 2?
> > i.e. this is how my network is set up...
> >
> >
> > dsl modem ---- hub ---- computer
> > |________ computer (host)
> >
> > thanx in advance,
> > adam
> > ant
> > Lunch Lady Industries - Taking The Cafeteria By Storm
> > http://www.lunch-lady.com
> > antadam@lunch-lady.com
> >
ant
Lunch Lady Industries - Taking The Cafeteria By Storm
http://www.lunch-lady.com
antadam@lunch-lady.com
This archive was generated by hypermail 2a24 : Thu Aug 10 2000 - 19:09:49 MDT