Subject: Re: Mounting ATA Drive with Sonnet Tempo
From: Dan Burcaw (dburcaw@terraplex.com)
Date: Thu Aug 09 2001 - 16:36:06 MDT
On one of our boxes with a Sonnet Tempo, I see:
AEC6260R: IDE controller on PCI bus 00 dev 68
AEC6260R: chipset revision 1
AEC6260R: not 100% native mode: will probe irqs later
AEC6260R: ROM enabled at 0x81820000
ide2: BM-DMA at 0x0480-0x0487, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0x0488-0x048f, BIOS settings: hdg:pio, hdh:pio
hdh: 40021632 sectors (20491 MB) w/2048KiB Cache, CHS=39704/16/63, UDMA(66)
The main partition I use on this drive is number 6. So, it is mounted as
/dev/hdh6 (which is most certainly an ATA device and not SCSI).
Hope this helps!
-Dan
> Look through dmesg to see if you can see the card. That will at least tell
> you if the kernel can see it or not.
>
> Bryn
>
> Christian writes:
> > I just installed kernel 2.4.4 so I can mount my drives attached to my
> > Sonnet Tempo ATA controller, but I can't figure out what the device name
> > would be. MacOS references the drive as scsi (specifically scsi bus 1
> > device 2), but I don't know how linux sees it. Anyone have any ideas?
> >
> > Thanks
--Regards, Dan Burcaw Terra Soft Solutions, Inc.
This archive was generated by hypermail 2a24 : Thu Aug 09 2001 - 15:38:25 MDT