Subject: Re: No YDL on New G4 -- More Details
From: Jim Cole (greyleaf@yggdrasill.net)
Date: Wed Jun 13 2001 - 21:26:15 MDT
Ted Goranson's bits of Tue, 12 Jun 2001 translated to:
>Well if it is on the site, it isn't anywhere where a casual buyer
>would find it. Look at this:
>
><http://www.yellowdoglinux.com/support/faq_hardware.shtml>
>
>(I didn't think to click on the picture. Silly me.)
Heh. I didn't think of that either. I found similar information somewhere
else on the site. In any case, I was just hoping you could post enough
relevant information for someone to help you out.
You show the following three lines in the output below.
panic_ide: enabling IDE bus ID 2
panic_ide: enabling IDE bus ID 0
panic_ide: enabling IDE bus ID 1
Perhaps the actual output was pmac_ide: rather than panic_ide: ? I would
have expected pmac_ide:, but if it really includes the word "panic"...
Your boot fails at the same point that my machine detects the PCI bus
location of my SCSI card. As I understand it, there is no support for your
39160, so maybe that is related to the failure. If you are up for mucking
with your hardware a bit, you might want to try booting with the SCSI card
removed. Obviously not a solution, but it might pin point the problem, or
at least eliminate one possibility. Sorry I don't have anything more
concrete.
Jim
>Anyway, my purpose is not to slam Terrasoft, but to raise the
>question what can I do now?
>
>Here are my specifics:
>
>733 AGP G4 with 768M RAM
>
>Two disks:
>
>ATA 62G Maxstor with 3 HSF+ partitions: Mac OS 9.1, Mac OS X 10.03,
>Blank for YDL
>Ultrawide SCSI 72G Quantum on an Adaptec 39160, one partition for
>data and workspace
>
>Two monitors:
>
>Both Electron22Blue 1920 x 1440
>
>One on AGP nVidea geForceMX 2
>Other on PCI, a Radeon 32M
>
>Kensington Trackball
>
>I'm supposed to be able to use the yaboot, non-graphical installer.
>But what I get is the following:
>
>Welcome to taboot version 1.1.1
>boot: install
>Loading Kernel...
> Elf32 Kernel loaded
>Loading ramdisk...
>
>
>
>(Penguin photo)
>GMT delta read from XPRAM: -240 minutes, DST on
>via_calibrate_decr:decrementer_count = 332908 (1997451 ticks)
>Console: colour dummy device 80x25
>Calibrating delay loop... 730.72 BogoMIPS
>Memory: 703840k available (1784 kernel code, 10724k data, 188k init)
>[c0000000, ebf00000]
>Dentry hash table entries: 131072 (order 8, 1024k)
>Buffer cache hash table entries: 524288 (order 9, 2048k)
>Page cache hash table entries: 262144 (order 9, 1024k)
>UFS: Diskquotas version dquot_6.4.0 initialized
>POSIX confomance testing by UNIFIX
>PCI: probing PCI Hardware
>Linux NET4.0 for Linux 2.2
>Based upon Swansea University Computer Society NET3.039
>NET4: Unix domain sockets 1.0 for Linux NET4.0
>NET4: Linux TCP/IP 1.0 for NET4.0
>IP protocols: ICMP, UDP, TCP, IGMP
>TCP: Hash tables configured (ehash 524288 bhash 65536)
>NET4: Appletalk .18 for Linux NET4.0
>Initialing RT netlink socket
>Starting kswapd v 1.5
>clgen: Driver for Cirrus Logic based graphic boards, v1.5.2
> Couldn't find PCI device
>Using unsupported 1920x1440 NVDA,NUMac at a8004000, depth=8, pitch=2048
>Console: switching to colour frame buffer device 240x90
>fb0; Open Firmware frame buffer device on /pci@f0000000/NVDA,NVMac@10
>atyfb: Unknown Mach 64 0x0000
>IBM_E15: initializing
>IBM_E15: could not find S3 864 in system
>input0: Macintosh mouse button emulation
>Serial driver version 4.27 with no serial options enabled
>PowerMacZ8530 serial driver version 2.0
>ttyS0 at 0xecad4020 (irq=22) is a Z8530 ESCC (cobalt modem)
>ttyS1 at 0xecadb000 (irq=50) is a Z8530 ESCC
>pty: 256 Unix98 ptys configured
>Macintosh non-volatile memory driver v1.0
>RAM disk driver initialized: 16 RAM disks of 16384k size
>loop: registered device at major 7
>panic_ide: enabling IDE bus ID 2
>panic_ide: enabling IDE bus ID 0
>panic_ide: enabling IDE bus ID 1
>hda: Maxtor 5T060H6, ATA DISK drive
>hdc: PIONEER DVD-RW DVR-103, ATAPI CDROM drive
>ide0 at 0xfaae1000-0xfaae1007, 0xfaae1160 on irq 19
>ide1 at 0xfaae5000-0xfaae5007, 0xfaae1160 on irq 20
>hda: Enabling Ultra DMA 4
>hda: Maxtor 5T0606H6, 58644M, w/2048kB cache, CHS=7476/255/63, (U)DMA
>hdc: Enabling MultiWord DMA 2
>hdc: ATAPI 24x DVD-ROM DVDAM CD-R/RW drive, 2000kC Cache
>Uniform CDROM driver Revision: 3.11
>md driver 0.36.0 MAX_MD_DEV=4, MAX_REAL=8
>Machine check in kernel mode. (regs at c06799d0)
>Caused by (from srr1): L2 data cache parity error
>NIP: C0159F38 XER: 20000000 LR: C015BD8 REGS: c06779d0 TRAP: 0200
>MSR: 00109030 [EE, IR, DR, ME]
>TASK = c0676000[1] 'swapper' mm->pgd c0202000 Last syscall: 120
>GPR00: 00000020 C0679A80 C0678000 C1B6D000 00100004 C02A61D0 00000002 C04D4738
>GPR08: C026D92C ECAED000 CO26D930 F2800000 22444028 00000000 00000000 00000000
>GPR16: 00000000 00000024 CO216EB0 C0679E4C C0679A98 00000000 00000000 C0679AA8
>GPR24: 00000023 00000046 C0674700 00000009 00000000 C0230000 C0216EB0 C1B6D000
>Call backtrace
>C0011CA8 C015BBD8 C023E0B0 C023DDDC C0238408 C022A9D8 C0004A14
>C000A73C
>Kernel Panic: machine check
>Rebooting in 180 seconds..
>
>Any ideas?
>
>Best, Ted
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
This archive was generated by hypermail 2a24 : Wed Jun 13 2001 - 20:31:50 MDT