Subject: Re: Mail OSX and YDL
gubaguba@mac.com
Date: Sat Nov 10 2001 - 17:11:40 MST
Got it working. Was able to get mail when I connected via dial up. Now
just need to play with settings so can connect on local network. You
were right earlier with setting that was a big help I'm sure. Also with
the network both machines are connected via router switch combo. I
think if I change setting for local IP I'll be good.
Thanks for your help
P Guba
On Saturday, November 10, 2001, at 05:17 PM, Jim Cole wrote:
> Don't know about the router; I was assuming both machines were on
> the same network, connected with a hub/switch. For POP3 you need
> to make sure port 110 is not blocked.
>
>
> Jim
>
> Paul Guba's bits of Sat, 10 Nov 2001 translated to:
>
>> Thanks Jim I made those changes and still not able to get mail off of
>> server get pop server not responding message. Is there a port that
>> needs to be opened on my router.
>>
>> P Guba
>> On Saturday, November 10, 2001, at 02:07 AM, Jim Cole wrote:
>>
>>> Assuming the POP3 server is installed, I think you need only
>>> enable it in /etc/xinetd.d (i.e. set disable to no in ipop3)
>>> and restart xinetd (i.e. /etc/init.d/xinetd restart).
>
This archive was generated by hypermail 2a24 : Sat Nov 10 2001 - 17:23:33 MST